How to Remove Tarnish from Your Jewelry

1. Diagnosis: What kind of metal is it?

  • Silver: Oxidation is black/dark gray.

  • Brass/Bronze: Oxidation often looks brown, green, or dull.

  • Historic patina: Sometimes that dark layer is actually desired because it makes the jewellery look "old" and authentic. Be careful: If you completely remove the oxidation, the jewellery often looks "too new."

2. The method: Clean safely

Method A: The gentle cleaning (For all metals)

For daily maintenance or light oxidation:

  1. Bath: Mix lukewarm water with a few drops of mild dish soap.

  2. Clean: Let the jewellery soak for 5-10 minutes. Use a very soft toothbrush to gently remove dirt from corners and holes.

  3. Dry: Rinse with clean water and pat dry immediately with a soft cotton cloth.

Method B: The chemical/natural method (For silver)

Silver responds well to the "electrolytic" method:

  1. Aluminum: Place a sheet of aluminum foil on the bottom of a plastic container.

  2. Solution: Place the silver jewellery on it, sprinkle some baking soda (sodium carbonate) over it, and pour boiling water over it.

  3. Reaction: The oxidation shifts through a chemical reaction from the silver to the aluminum.

  4. Finish: Remove the jewellery, rinse it off, and polish with a silver polishing cloth.

Method C: Polishing (For brass and bronze)

Brass and bronze often need a mechanical approach:

  1. Polishing paste: Use a mild metal polish (like Brasso or a specialized metal cleaner from our shop).

  2. Rub: Use a soft cloth. Rub in circular motions.

  3. Attention: Don't use steel wool, it causes microscopic scratches where oxidation builds up faster.

3. Checklist for your workshop

  • [ ] Soft cotton cloths (essential for a streak-free result).

  • [ ] Soft toothbrush (for complex patterns).

  • [ ] Metal polish (specific for copper/brass).

  • [ ] Silver polishing cloth (impregnated for silver).

Expert tip: A jewellery piece that is "exposed" after polishing oxidizes faster than ever before. After cleaning, apply a paper-thin layer of microcrystalline wax (like Renaissance Wax) or neutral beeswax. This seals the metal from oxygen and moisture, keeping your jewellery shiny for months without polishing.


Internal links

Maak het verschil, doneer nu!

Lees onze nieuwste blogs!